Displaying Text on a Screen. "Hello!" 

Supplies Needed

Arduino and USB Cable
OLED Screen
4 Pin/Hole Jumper Wire

Part 1: Downloading the OLED Library

Open up your Arduino IDE program. Then go to tools and manage libraries to get the following. 
Install the "Adafruit SSD1306" library. If it asks you to install other ones for it to work, say yes to getting all of them. 

Part 2: Wiring the OLED Display and Graphics Test

The Wiring. 
1) GND to GND 
2) VCC to 5 V
3) SCL to pin A5
4) SDA to pin A4
Download, verify, and upload this code.
This is a graphics test. 
Arduino File
oled_graphics_test.ino
File Size: 11 kb
File Type: ino
Download File
Text Only File Button
Did it work? If not, get help from your teacher. 

Part 3) The Code. Writing Text. Hello World! 

Type up this code to the right. 
After you think you have it, check it (verify) 
Upload it to board if that works and you have the screen wired correctly like the picture above. 

Did it work? 

If you got it to work, then play around with the text size, color, Cursor positions, and actual text you want to type.

​Email Mr. Dorsey a picture if you make something really cool.